- 1 How do you build a split rail fence?
- 2 What is the best wood to use for a split rail fence?
- 3 How far apart are posts on a split rail fence?
- 4 How deep do split rail fences need to be?
- 5 Do you need to cement split rail fence posts?
- 6 What is the cheapest fence to install?
- 7 How long will pressure treated split rail fence last?
- 8 How do you treat a split rail fence?
- 9 Are split rail fence pressure treated?
- 10 Should fence rails be level or follow the ground?
- 11 How long are split rails?
How do you build a split rail fence?
Steps to Building a DIY Split Rail Fence
- Mark and measure your yard to ensure that your fence materials fit.
- Dig your post holes with your post hole auger.
- Fill six inches of the holes with gravel.
- Starting with the end posts, insert posts into the holes.
- Insert your rails into the holes of the posts, and voila!
What is the best wood to use for a split rail fence?
When it comes to the type of wood used to make your wood split rail fence, Western Red Cedar and Yellow Pine are the best options on the market. If you’re going with a wood fence, then these should be your choices in tree species.
How far apart are posts on a split rail fence?
Some of the commonly available options are 9 feet long and 11 feet long rails. Knowing this measurement would help you to space the posts accordingly. 9ft rails have post every 8ft and 11ft rails have post every 10ft.
How deep do split rail fences need to be?
Dig holes about 24 inches deep and 10 inches in diameter. The most important measurement, though, is from the bottom of the hole to the string, which should be 36 inches.
Do you need to cement split rail fence posts?
No, the hole should be filled only with the dirt that came out of the hole and tamped back in. Concrete is bad for the wood (erodes it), and gravel simply creates a porous pocket where water can collect. Well tamped soil is very stable and waterproof. Some people use concrete for gate posts for additional stability.
What is the cheapest fence to install?
The Most Affordable Ways to Fence in a Yard
- Treated pine ($12 to $19 per linear foot installed)
- Chain link ($10 to $20 per linear foot)
- Wrought iron ($24 to $32 per linear foot)
- Barbed wire ($1.50 to $2 per linear foot)
- Hog wire ($3 to $5 per linear foot)
- Electric ($1 to $6 per linear foot)
- Pallet (free!)
How long will pressure treated split rail fence last?
Pressure Treated Rails Pressure treated wood will usually last about 9 and 25 years, so it comes in just under the natural cedar. This type of treated wood is also filled with chemicals – those can leach out into the surrounding ground, which is why it should never be used near potable water sources or food gardens.
How do you treat a split rail fence?
Our 7 tips for maintaining your split rail fence include:
- Use pressure-treated wood.
- Stain the wood regularly.
- Keep plants and grass away.
- Use Fence Armor.
- Choose vinyl for low maintenance.
- Do repairs immediately.
- Regular inspections reduce common problems.
Are split rail fence pressure treated?
Split Fence Rail Rail is big and heavy and made with pressure-treated wood.
Should fence rails be level or follow the ground?
When building a fence on uneven terrain, one option is to follow the contours of your yard. This means that the horizontal rails of your fence will follow your yard in a smooth line that is parallel to the ground rather than level. The contoured method works best when the slope is slight rather than dramatic.
How long are split rails?
Rails are usually 8 feet or 11 feet long and can be round, half round or square/diamond shaped. The rails insert into the holes in the posts and are held in place by their own weight.