Readers ask: How Far Apart Fence Posts?

How far apart should fence posts be?

How far apart should fence posts be? In general, T-posts are spaced between 8-12 feet apart, depending on what you’re trying to contain or keep out. Closer spacing is suggested for large livestock, like cattle, while wider spacing is fine for fending off deer and other large pests.

Can fence posts be 10 feet apart?

Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.

Should fence posts be 6 or 8 feet apart?

Fence posts should be set six to eight feet apart on a 6 foot wood fence. Do not go beyond eight feet or the fence may not be stable enough.

Is 2 feet deep enough for fence posts?

2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.

You might be interested:  How To Build A Vinyl Lattice Fence?

How many bags of cement do I need for a fence post?

Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

Does fence go on inside or outside of posts?

The ‘quick’ answer is that the finished, or good side of the fence faces the outside of your property, visible to neighbors and the outside world. That being said, the fence posts (or poles), rails, and other hardware are installed on the inside of the fence line and face you.

What size Post do you use for a 6 foot fence?

The depth of the post hole needs to be 1/3 to 1/2 the height of your fence. For example, if you are building a fence that’s 6 feet tall, you will need a hole that is at least 2 feet deep. That also means that you’d need to use an 8-foot post.

Should fence posts be set in concrete?

Setting Fence Posts in Concrete Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.

What is a rot board on a fence?

A rot board, also called a kickboard, is a horizontal board installed along the bottom of the fence panel. Typically a 2×6 or 2×8 piece of wood, it runs along the base of the entire fence panel for a finished look and added protection.

You might be interested:  Often asked: How To Install Galvanized Fence?

Is 2 feet deep enough for a 6 foot fence?

The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

Will wooden posts rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.

How deep should a 3 foot fence post be?

The general rule is when setting a fence post into the ground, the height required above the ground should be divided by 3 and this figure is the hole depth required. The width of the post hole should be 3 times the width of diameter of the post.

Leave a Reply

Your email address will not be published. Required fields are marked *