Quick Answer: How Many 80lb Bags Of Concrete Per Fence Post?

How many bags of concrete do I need for a fence post?

Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

How many bags of concrete do I need for a 4×4 post?

It’s right for a 4×4 fence post to have 1 bag per hole. The depth of the post hole should be half of the post height. For a 6′ above ground post, place 3 feet in the ground and use a post with an overall height of 9 feet.

You might be interested:  Readers ask: How To Reinforce A Fence?

How much concrete do I need for a 6×6 fence post?

On a 6′ fence I would go all of 3′ deep. General rule of thumb is 1/3 of post in the ground. I also would use concrete. 6×6 posts are over kill for a fence of this height IMO but you maybe matching to existing so do what you want to do.

Is 2 feet deep enough for fence posts?

2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.

Do I have to use concrete for fence posts?

Do Fence Posts Need To Be Set in Concrete? No, fence posts don’t need to be set in concrete, and there are plenty of other ways to fix your posts if this feels a bit too permanent. If you are using wooden posts, concrete may actually be the worst option.

How many 80lb bags of concrete make a yard?

One 80lbs bag of Quikrete Concrete Mix will yield approximately. 60 cu ft. So it will take 45 bag to equal one cubic yard of concrete. If you have a project over a 1/2 a cubic yard you should consider our Mix On-site Concrete especially if you are hand mixing.

Is fast setting concrete weaker?

Fast-setting concrete isn’t just simple and fast, it’s also durable and strong, reaching 4000 psi — or pounds of force per square inch —after a month. That’s stronger than the concrete used for foundations on most homes.

You might be interested:  How To Build A Wood Privacy Fence?

How deep should a 3 foot fence post be?

The general rule is when setting a fence post into the ground, the height required above the ground should be divided by 3 and this figure is the hole depth required. The width of the post hole should be 3 times the width of diameter of the post.

How many bags of concrete do I need for a 10×10 slab 4 inches thick?

Regarding this, “how many bags of concrete do I need for a 10×10 slab of 4 inch thick?”, at 4 inches thick, generally you will need 49 bags of 90lb ready mix concrete, 56 bags of 80lb concrete, 74 bags of 60lb concrete or 111 bags of 40lb ready mix concrete for a 10×10 slab.

How much area can one bag of cement cover?

One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about. 375 cubic feet. For example, if you need to cover 33.333 cubic feet, using 60-pound bags of concrete, divide 33.333 cubic feet by. 45 cubic feet to get 74.07 total bags of concrete.

How many bags of cement do I need for 1 cubic meter?

How many bags of cement are needed to mix one cubic meter of concrete? A. One cubic meter of concrete is equal to 1.308 cubic yards of concrete. If there are 5 1/2 bags of cement in 1 cubic yard of concrete, there would be 7.2 bags in 1 cubic meter of concrete.

What is the best concrete mix for fence posts?

In terms of the ratio to use for a concreting fence posts, the best mix is a mix of 1:2:4 (1 cement, 2 sand, 4 aggregate). Concrete is always best mixed using a cement mixer to ensure it’s even, but if you only need to mix a little, hand mixing is ok (see mixing concrete project above for tips on how to do this).

You might be interested:  FAQ: How To Paint Iron Fence?

Is 2 feet deep enough for a 6 foot fence?

The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

Will wooden posts rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.

What is the maximum distance between fence posts?

Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.

Leave a Reply

Your email address will not be published. Required fields are marked *