- 1 How do you move a chain link fence post?
- 2 How hard is it to remove chain link fence?
- 3 Can you reuse fence posts with concrete?
- 4 Do chain link fence posts need to be cemented?
- 5 How do you secure the bottom of a chain link fence?
- 6 How deep are chain link fence posts?
- 7 How do you straighten a fence post without removing it?
If your posts are not set in concrete, you can probably wiggle them loose after you dig away about 6 inches of soil. Push and pull the post back and forth in the hole until it begins to separate from the soil. Pull the post up and out of the ground once it moves freely in the soil.
Whether upgrading to a new fence or simply replacing your current one, removing a chain link fence is a relatively easy process – providing you take the right steps. That said, the task can be quite laborious, so make sure you get some help with the removal to make the job that bit easier.
Can you reuse fence posts with concrete?
Pulling up an existing fence post to reuse can be quite a task. Posts with concrete at the base are the most difficult to remove and reuse because the concrete base is larger than the post, which makes pulling it up through the ground much harder.
You can install a chain link fence without using concrete, but it is not recommended. Anchoring each fence post in concrete is the best way to ensure your fence will stand straight and tall for many years.
The quickest and easiest way to secure the bottom of your chain link fence is to use a garden border and line the bottom of your fence. Alternatively, you could get tent stakes and secure the bottom of the fence to the ground. Choosing the right option depends on your exact situation and needs.
Dig 6-inches to 8-inches for end and corner posts. Dig 4-inches to 6-inches for line posts. Make the holes a third of the length of the pole length plus 4-inches for gravel. Fill all the holes with 4-inches of gravel.
How do you straighten a fence post without removing it?
The Fix-A-Fence Solution
- Step 1 – Prepare the Site.
- Step 2 – Prepare the Fix-a-Fence Kit.
- Step 3 – Position the Bracket in the Hole.
- Step 4 – Mix a 60lb Bag of Concrete.
- Step 5 – Fill the Hole with Concrete.
- Step 6 – Take a Break While the Concrete Cures.
- Step 7 – Reposition the Fence Post and Attach the Bracket.