- 1 Is chain link fence easy to install?
- 2 How far apart should posts be on a chain link fence?
- 3 What is the average cost to install a chain link fence?
- 4 Should chain link fence touch the ground?
- 5 How much does 100 feet of chain link fence cost?
- 6 Do chain link fence posts need to be cemented?
- 7 How do you anchor the bottom of a chain link fence?
- 8 How do you secure the bottom of a chain link fence?
- 9 How much does chain link fence stretch?
- 10 Can you Restretch a chain link fence?
- 11 How much does 200 ft of chain link fence cost?
- 12 What is the cheapest fence to install?
- 13 What is the cheapest way to put up a fence?
Chain link fences can both keep things in your yard and keep things out. Installing a chain link fence is a project that takes a little bit of skill and some hard work.
SPACING FENCE POSTS As chain link fence posts are smaller and sturdier than many other types, the holes should be smaller and can be farther apart. Follow the fence manufacturer’s instructions for spacing, which typically ranges from 4-10′ apart —spacing should not exceed 10′ on-center.
Chain link fencing costs between $5 and $20 per foot for materials and $10 to $20 per linear foot for installation. Homeowners typically pay $2,148 on average, or between $1,184 and $3,114.
Generally, it is not recommended for a chain-link fence to touch the ground. Ground contact makes the bottom of the fence more vulnerable to corrosion. It can also make yard maintenance more difficult. The fence touching the ground can prevent rodents and other small animals from getting inside for garden areas.
The cost of chainlink fencing is calculated by the length, height, type of fence and features being installed. A 5 foot high, 100-foot chain link fence with 2 gates is approximately $2,100, or $21 per foot.
You can install a chain link fence without using concrete, but it is not recommended. Anchoring each fence post in concrete is the best way to ensure your fence will stand straight and tall for many years.
The simplest way to reinforce your chain link fence at the bottom is by using tent stakes. Tent stakes can be bought at any hardware store, and they are very cheap. If you don’t want to do any kind of installation or you’re just not the DIY person, then using tent stakes is a simple and straightforward solution.
The quickest and easiest way to secure the bottom of your chain link fence is to use a garden border and line the bottom of your fence. Alternatively, you could get tent stakes and secure the bottom of the fence to the ground. Choosing the right option depends on your exact situation and needs.
Fence fabric should be stretched from the terminal post already attached to the terminal post at the other end of the line – or – at stretches less than two hundred feet.
Stretching chain-link fence is not very difficult, but the job can be done much better when you have a mechanical advantage. Since you are essentially trying to stretch metal, it can be near impossible to get all the kinks and ripples out by hand.
Therefore, when the average cost of materials and installation are added together, the total cost for a 200 linear foot chain link fence is $3,000 to $5,200, which breaks down to about $16 to $26 per linear foot.
What is the cheapest fence to install?
The Most Affordable Ways to Fence in a Yard
- Treated pine ($12 to $19 per linear foot installed)
- Chain link ($10 to $20 per linear foot)
- Wrought iron ($24 to $32 per linear foot)
- Barbed wire ($1.50 to $2 per linear foot)
- Hog wire ($3 to $5 per linear foot)
- Electric ($1 to $6 per linear foot)
- Pallet (free!)
What is the cheapest way to put up a fence?
Though yard fencing can be expensive, we’ve rounded up some cheap fence ideas to fit nearly any budget.
- Corrugated fencing. Recycling old materials is a great dual-purpose way to build cheap fencing.
- Split rail.
- Chain link.
- 4-rail horse fence.
- Bamboo fences.
- Wrought iron.
- Vinyl fencing.
- Split rail and mesh.