Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
Can you straighten a bent metal fence post?
Unbolt both rail ends that hold the top rail on the terminal posts using the adjustable wrench and socket wrench. Pull the rail ends off the brackets they were attached to. Remove the rail ends from the bent top rail. Realign and make true the terminal and line posts, if necessary.
Can you fix a warped fence post?
Another option is to cut the post where the bend is and big-dowel on a new piece. You can also screw a chunk of pressure-treated or cedar onto the post’s top and re-screw the fence panels onto that, to then slice off the warp from the yard side.
How deep should a fence post be?
Rule of Thumb Hole depth = put approximately 1/3 of the post in the hole. A 2m (6 foot) post should have up to 600mm (2 foot) in the ground.
How many bags of concrete do I need for a fence post?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
Will wooden posts rot in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.
Should I use concrete for fence posts?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.