Contents

- 1 How do you space fence posts evenly?
- 2 How do you measure a square for fencing?
- 3 Are round or square fence posts better?
- 4 How far should you space T posts?
- 5 What is the maximum distance between fence posts?
- 6 What is the 3 4 5 rule in construction?
- 7 What is the 3 4 5 triangle method?
- 8 Which is stronger round or square wood?
- 9 Can you use round fence posts?
- 10 Can fence posts be 10 feet apart?
- 11 How many bags of cement do I need for a fence post?

## How do you space fence posts evenly?

Typically, fence posts are spaced between six and eight feet apart. The corner posts are set first. To align all of the posts in between, stretch a line from each corner post to work as your guide. Mark the exact position where you’d like each post hole dug.

## How do you measure a square for fencing?

Multiply the width by the height. The result is the square footage of your fence. For example, if your width is 500 feet and your height is six feet, your equation would be as follows: 500 x 6 = 3,000. The square footage of your fence is 3,000.

## Are round or square fence posts better?

Secondly, while square posts have a more stable base than round posts, the latter is more resistant to animal blows. Apart from this, square posts are susceptible to water damage and rot because of its exposed corners. But you will not experience this problem with round posts that have a more contained surface.

## How far should you space T posts?

How far apart should fence posts be? In general, T-posts are spaced between 8-12 feet apart, depending on what you’re trying to contain or keep out.

## What is the maximum distance between fence posts?

Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.

## What is the 3 4 5 rule in construction?

To get a perfectly square corner, you want to aim for a measurement ratio of 3:4:5. In other words, you want a three-foot length on your straight line, a four-foot length on your perpendicular line, and a five-foot length across. If all three measurements are correct, you’ll have a perfectly square corner.

## What is the 3 4 5 triangle method?

The 3:4:5 triangle is the best way I know to determine with absolutely certainty that an angle is 90 degrees. This rule says that if one side of a triangle measures 3 and the adjacent side measures 4, then the diagonal between those two points must measure 5 in order for it to be a right triangle.

## Which is stronger round or square wood?

The answer is round tube has a higher resistance to both flex and torsional twisting than square for a given weight. Use ERW tubing as it is much, much stronger than CHS.

## Can you use round fence posts?

Round Post Advantages Round posts are used with rail fences. Because the rails go through the holes in the posts, there is no need for a flat surface on the post to which you attach the rails. If you have a large property with cedar trees on it, cut your own cedar posts and save money on fencing lumber.

## Can fence posts be 10 feet apart?

Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.

## How many bags of cement do I need for a fence post?

Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.