How To Build High Tensile Fence?

How far apart should fence posts be for high tensile fence?

As a rule of thumb, line posts are spaced about 30-feet apart but it depends on many factors including the number of wires in the fence, the terrain, as well as type and number of animals being controlled. Increasing the distance between posts reduces the cost of the fence.

How tight should high tensile fence be?

– Over-tensioning hi-tensile wire: Hi-tensile wire needs only between 150 to 200 pounds of tension. If you are used to putting up barbed wire, then you would normally put about 300 to 350 pounds of tension on it. So, don’t over tension hi-tensile wire. This is normally the last step in putting up your fence.

Can fence posts be 10 feet apart?

Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.

What does high tensile fence mean?

High tensile wire is the product of high carbon steel with a carbon content of. Other wire fencing is made of low carbon steel with a maximum of 10% carbon content. The higher the carbon content, the stronger the wire.

You might be interested:  Often asked: How To Install A Shadowbox Fence?

Will high tensile fence keep goats in?

Fencing is the most critical factor in raising goats on pasture. Goats can be controlled with four to five strands of high- tensile electrified wire. The wire spacings can vary from 6 to 8 inches near the ground to 8 to 12 inches for the top strands.

How much does it cost to install high tensile fence?

High-tensile wire fencing is the least expensive option at $3.50 to $8 per foot. Pipe fencing costs $10 to $15 per foot, including installation. The cost to install a wooden fence ranges from $12 to $17 per foot, while vinyl costs $14 to $28 per foot. You’ll pay between $2 and $20 per foot for materials.

Can you electrify high tensile wire?

This electric shock keeps the animal off the fence; electrified high tensile fences are not susceptible to animal pressure. The class lll galvanization used on a 12-1/2 gauge, high carbon, high tensile fence wire inhibits rust from forming for years and years.

What is a good distance between fence posts?

Typically, fence posts are spaced between six and eight feet apart. The corner posts are set first. To align all of the posts in between, stretch a line from each corner post to work as your guide.

What is a fence stretcher?

Fence stretchers are used to provide the proper amount of tension on wire fences. A tight fence protects livestock and wildlife from getting tangled in the fence which could cause injury or even death. They all work the same with some type of clamp to attach to the wire and a ratcheting system to tighten it.

Leave a Reply

Your email address will not be published. Required fields are marked *